Type
Backflow Test Accessories
Backflow PreventionBackflow Test Accessories
Viewing Page 1 of 5
(47 results)
FDA APPROVED GREASE (MOLYKOTE 111) 5.3 O
Item #:
SLC200
Supplier #: SLC200
The Dow Corning O-Ring Lubricant is food and beverage safe. The food-grade lubricant is FDA and NSF approved. Use the Dow Corning 111 O-Ring Silicone Lubricant on all brands of Whole House Water Filter Housing Rubber and Plastic O-Rings and Gaskets, all Reverse Osmosis System O-Rings, all Drinking Water Filtration Systems, all Ultraviolet System O-Rings, and Water Softener and Carbon Water Filter O-Rings. This o-ring sealant is recommended for all water treatment o-rings and seals. The Dow Corning 111 Silicone Sealant is premium grade and can also be used in underwater photography cameras, scuba gear, lubrication for control and pressure plug valves, water softener and faucet valves, sealant for vacuum and pressure systems, sealant for outdoor equipment (also shipboard) subject to washing and harsh environment exposure: meters, electrical service entrance and underground connections, damping medium for dash pots in electrical and electronic equipment, used as an anti-stick and sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout. The Dow Corning 111 Lubricant has a chemical barrier coating, good resistance to most chemicals, low vapor pressure, low volatility, and excellent water resistance. Should I use a lubricant on my O-Ring? If you choose to reuse your water filter housing o-rings, you should use a lubricant on the o-rings to keep them effective. You should only use a special silicone lubricant. Do I need to lubricate the gasket on the filter cartridge? Generally, no, because each replacement filter cartridge comes with its own new gasket if one is needed. The rubber gasket is the top or bottom part of the replacement filter cartridge and is not the same as the o-ring. Made in the U.S.A.
Supplier #: SLC200
The Dow Corning O-Ring Lubricant is food and beverage safe. The food-grade lubricant is FDA and NSF approved. Use the Dow Corning 111 O-Ring Silicone Lubricant on all brands of Whole House Water Filter Housing Rubber and Plastic O-Rings and Gaskets, all Reverse Osmosis System O-Rings, all Drinking Water Filtration Systems, all Ultraviolet System O-Rings, and Water Softener and Carbon Water Filter O-Rings. This o-ring sealant is recommended for all water treatment o-rings and seals. The Dow Corning 111 Silicone Sealant is premium grade and can also be used in underwater photography cameras, scuba gear, lubrication for control and pressure plug valves, water softener and faucet valves, sealant for vacuum and pressure systems, sealant for outdoor equipment (also shipboard) subject to washing and harsh environment exposure: meters, electrical service entrance and underground connections, damping medium for dash pots in electrical and electronic equipment, used as an anti-stick and sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout. The Dow Corning 111 Lubricant has a chemical barrier coating, good resistance to most chemicals, low vapor pressure, low volatility, and excellent water resistance. Should I use a lubricant on my O-Ring? If you choose to reuse your water filter housing o-rings, you should use a lubricant on the o-rings to keep them effective. You should only use a special silicone lubricant. Do I need to lubricate the gasket on the filter cartridge? Generally, no, because each replacement filter cartridge comes with its own new gasket if one is needed. The rubber gasket is the top or bottom part of the replacement filter cartridge and is not the same as the o-ring. Made in the U.S.A.
BACKFLOW TAGS 6X3 10PT XT-FILM
Item #:
BDT
A fillable backflow prevention test kit tag that comes with self adhesive clear laminate sheet to protect from damage after being filled in. The dimensions are 6 tall x 3 wide, and comes with a metal eyelet for connecting via wire or wire tie.
A fillable backflow prevention test kit tag that comes with self adhesive clear laminate sheet to protect from damage after being filled in. The dimensions are 6 tall x 3 wide, and comes with a metal eyelet for connecting via wire or wire tie.
COMPLETE SET OF ALL QUICK TEST FITTING
Item #:
MW110617
Supplier #: 110617
Supplier #: 110617
110617
Quick Connect Test Cock Adapter Kit
Designed for hand tight connection of Differential Pressure Test Gauges to Backflow Prevention Assemblies.
No Wrenches or Teflon Tape Required Set includes all fittings required to test any size Backflow device.
Quick Connect Test Cock Adapter Kit
Designed for hand tight connection of Differential Pressure Test Gauges to Backflow Prevention Assemblies.
No Wrenches or Teflon Tape Required Set includes all fittings required to test any size Backflow device.
- (3) 1/4" NPT X 1/4" Flare
- (3) 1/2" NPT X 1/4" FNPT
- (3) 3/4" NPT X 1/4" FNPT
Includes 3 spare O-rings per size Packaged in a convenient plastic storage tube.
1/4 X 1/4 FL 90 DEG SWIVEL QC ADAPTERS
Item #:
MW110705
Supplier #: 110705
Supplier #: 110705
110705
90º Swivel Fittings - Rotate 360º after installation
1/4" NPT Quick Connect 1/4" Flare
Ideal for tight spaces
Set includes:
90º Swivel Fittings - Rotate 360º after installation
1/4" NPT Quick Connect 1/4" Flare
Ideal for tight spaces
Set includes:
- (3) 90º Swivel 1/4" NPT X 1/4" Flare Quick Connect Fittings
- (3) Spare O-rings
BLEED OFF ASMBY.
Item #:
MW830-0001
Supplier #: 830-0001
Supplier #: 830-0001
830-0001 (for USC Test Procedures)
Bleed-Off Valve Assembly - (soft seated needle valve)
Theory of Operation
Bleed-Off Valve Assembly - (soft seated needle valve)
Theory of Operation
