Browse Categories

Search in Category

Electric Boilers

Search Filters

  • 240/3 x

Browse Categories

Loading...

Electric Boilers

Boilers/Water Heaters/Electric Boilers 
Viewing Page 1 of 1 (7 results)
Boiler TS 27 KW 92000 BTU 240/1

Boiler TS 27 KW 92000 BTU 240/1

Item #: ELEEB-CX-27-24
Supplier #: EB-CX-27-24

TS Series Boiler (EB-S-**)

In our 25+ years of manufacturing boilers, our latest TS Series boiler design offers many benefits that were not previously offered in an electric boiler.  The TS Series allows you the flexibility to accomplish any radiant in-floor need.

Our front panel temperature knob allows you to simply dial-in your desired output temperature and the TS will automatically adjust to meet your water temperature needs.  Available in 13-27 kW, single phase 240V.

 

Other Benefits:

  • Built-in temperature/pressure gauge
  • High Mass/Low Mass element regulation
  • Boiler status panel
  • ASME/CSA US/Canada certification
  • Complete front panel accessibility
  • Dual Boiler option
  • Load Management connection
  • Super quiet operation
  • 20-year element/vessel warranty
Call 513-251-4343 for Availability
UOM : EA
Boiler TS 13.5 KW 46000 BTU 240/1

Boiler TS 13.5 KW 46000 BTU 240/1

Item #: ELEEB-CX-40-24
Supplier #: EB-CX-40-24

TS Series Boiler (EB-WX-**-*)

Our most deluxe model is designed for multiple temperature, high temperature, and zoning applications. This model has the ability to sense water temperature and maintain an accurate boiler temperature output by only energizing the electric elements for needed output (not full capacity). To learn more about this concept read WarmFlo. This model eliminates extra costs associated with relays, extra temperature controls, zone boxes, etc. Our more experienced installers use this boiler to avoid the extra cost of the above.

Our front panel temperature  knob allows you to simply dial in your desired output temperature and the TS will automatically adjust to meet your water temperature needs.  Available in 13-27 kW, single phase 240V and three phase 208V.

 

Other Benefits

  • Built-in temperature/pressure gauge
  • High Mass/Low Mass element modulation
  • Boiler status panel
  • ASME/CSA US/Canada certification
  • Complete front panel accessibility
  • Dual Boiler option
  • Load Management connection
  • Super quiet operation
  • 20-year element/vessel warranty
Call 513-251-4343 for Availability
UOM : EA
Boiler Indstrl 200 KW 682600 BTU 600/3

Boiler Indstrl 200 KW 682600 BTU 600/3

Item #: ELEEB-NB-105-240
Supplier #: EB-NB-105-240

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

  • ASME and CSA/UL listed
  • Vessel boasts a large 40-gallon capacity
  • Outdoor reset
  • Disconnect circuit breakers for each heating element
  • Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
  • Compact, can easily fit through service doors
  • No minimum return water temperature required
  • 5-year vessel warranty
  • 0-10VDC terminal enabling control of boiler via building automation system, etc.
  • Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

  • Circuit breakers, each stage
  • Manual reset hi-limit - 220° F
  • Auto reset limit control - 210° F
  • Low water cut-off with manual reset
  • ASME pressure relief valve, 30 psi
  • Pressure/temperature gauge
  • Drain pipe
  • 3” NPT inlet and outlet, with inspection opening
  • Incoloy sheathed heating elements
  • Built-in load management controls, vessel top screw-in
  • Staging indicator lights, at contactor
  • Main supply circuit lugs
  • Safety door interlock and lockable door latch

Control Box includes:

  • Contains all boiler controls and adjustments
  • Bender fault monitor (optional)
  • Manual reset low water cut-off
  • Hi-limit reset button
  • Temp Sensing & Alarm board
  • T775R controller (optional)
  • Alarm and alarm LED’s
  • Sequencer up to 15 stages
  • Progressive staging delay time
Call 513-251-4343 for Availability
UOM : EA
Boiler Indstrl 240 KW 819120 BTU 600/3

Boiler Indstrl 240 KW 819120 BTU 600/3

Item #: ELEEB-NB-150-240
Supplier #: EB-NB-150-240

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

  • ASME and CSA/UL listed
  • Vessel boasts a large 40-gallon capacity
  • Outdoor reset
  • Disconnect circuit breakers for each heating element
  • Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
  • Compact, can easily fit through service doors
  • No minimum return water temperature required
  • 5-year vessel warranty
  • 0-10VDC terminal enabling control of boiler via building automation system, etc.
  • Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

  • Circuit breakers, each stage
  • Manual reset hi-limit - 220° F
  • Auto reset limit control - 210° F
  • Low water cut-off with manual reset
  • ASME pressure relief valve, 30 psi
  • Pressure/temperature gauge
  • Drain pipe
  • 3” NPT inlet and outlet, with inspection opening
  • Incoloy sheathed heating elements
  • Built-in load management controls, vessel top screw-in
  • Staging indicator lights, at contactor
  • Main supply circuit lugs
  • Safety door interlock and lockable door latch

Control Box includes:

  • Contains all boiler controls and adjustments
  • Bender fault monitor (optional)
  • Manual reset low water cut-off
  • Hi-limit reset button
  • Temp Sensing & Alarm board
  • T775R controller (optional)
  • Alarm and alarm LED’s
  • Sequencer up to 15 stages
  • Progressive staging delay time
Call 513-251-4343 for Availability
UOM : EA
Boiler Indstrl 300 KW 1023900 BTU 600/3

Boiler Indstrl 300 KW 1023900 BTU 600/3

Item #: ELEEB-NB-180-240
Supplier #: EB-NB-180-240

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

  • ASME and CSA/UL listed
  • Vessel boasts a large 40-gallon capacity
  • Outdoor reset
  • Disconnect circuit breakers for each heating element
  • Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
  • Compact, can easily fit through service doors
  • No minimum return water temperature required
  • 5-year vessel warranty
  • 0-10VDC terminal enabling control of boiler via building automation system, etc.
  • Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

  • Circuit breakers, each stage
  • Manual reset hi-limit - 220° F
  • Auto reset limit control - 210° F
  • Low water cut-off with manual reset
  • ASME pressure relief valve, 30 psi
  • Pressure/temperature gauge
  • Drain pipe
  • 3” NPT inlet and outlet, with inspection opening
  • Incoloy sheathed heating elements
  • Built-in load management controls, vessel top screw-in
  • Staging indicator lights, at contactor
  • Main supply circuit lugs
  • Safety door interlock and lockable door latch

Control Box includes:

  • Contains all boiler controls and adjustments
  • Bender fault monitor (optional)
  • Manual reset low water cut-off
  • Hi-limit reset button
  • Temp Sensing & Alarm board
  • T775R controller (optional)
  • Alarm and alarm LED’s
  • Sequencer up to 15 stages
  • Progressive staging delay time
Call 513-251-4343 for Availability
UOM : EA
Boiler Indstrl 144 KW 491472 BTU 600/3

Boiler Indstrl 144 KW 491472 BTU 600/3

Item #: ELEEB-NB-60-240
Supplier #: EB-NB-60-240

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

  • ASME and CSA/UL listed
  • Vessel boasts a large 40-gallon capacity
  • Outdoor reset
  • Disconnect circuit breakers for each heating element
  • Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
  • Compact, can easily fit through service doors
  • No minimum return water temperature required
  • 5-year vessel warranty
  • 0-10VDC terminal enabling control of boiler via building automation system, etc.
  • Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

  • Circuit breakers, each stage
  • Manual reset hi-limit - 220° F
  • Auto reset limit control - 210° F
  • Low water cut-off with manual reset
  • ASME pressure relief valve, 30 psi
  • Pressure/temperature gauge
  • Drain pipe
  • 3” NPT inlet and outlet, with inspection opening
  • Incoloy sheathed heating elements
  • Built-in load management controls, vessel top screw-in
  • Staging indicator lights, at contactor
  • Main supply circuit lugs
  • Safety door interlock and lockable door latch

Control Box includes:

  • Contains all boiler controls and adjustments
  • Bender fault monitor (optional)
  • Manual reset low water cut-off
  • Hi-limit reset button
  • Temp Sensing & Alarm board
  • T775R controller (optional)
  • Alarm and alarm LED’s
  • Sequencer up to 15 stages
  • Progressive staging delay time
Call 513-251-4343 for Availability
UOM : EA
Boiler Indstrl 160 KW 546080 BTU 600/3

Boiler Indstrl 160 KW 546080 BTU 600/3

Item #: ELEEB-NB-75-240
Supplier #: EB-NB-75-240

Electro-Boiler Industrial Series

Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.

Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.

Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.

Features & Benefits

  • ASME and CSA/UL listed
  • Vessel boasts a large 40-gallon capacity
  • Outdoor reset
  • Disconnect circuit breakers for each heating element
  • Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
  • Compact, can easily fit through service doors
  • No minimum return water temperature required
  • 5-year vessel warranty
  • 0-10VDC terminal enabling control of boiler via building automation system, etc.
  • Software and interface cable for setup, monitoring, and troubleshooting

Standard Equipment

  • Circuit breakers, each stage
  • Manual reset hi-limit - 220° F
  • Auto reset limit control - 210° F
  • Low water cut-off with manual reset
  • ASME pressure relief valve, 30 psi
  • Pressure/temperature gauge
  • Drain pipe
  • 3” NPT inlet and outlet, with inspection opening
  • Incoloy sheathed heating elements
  • Built-in load management controls, vessel top screw-in
  • Staging indicator lights, at contactor
  • Main supply circuit lugs
  • Safety door interlock and lockable door latch

Control Box includes:

  • Contains all boiler controls and adjustments
  • Bender fault monitor (optional)
  • Manual reset low water cut-off
  • Hi-limit reset button
  • Temp Sensing & Alarm board
  • T775R controller (optional)
  • Alarm and alarm LED’s
  • Sequencer up to 15 stages
  • Progressive staging delay time
Call 513-251-4343 for Availability
UOM : EA