Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.
Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.
Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.
Features & Benefits
ASME and CSA/UL listed
Vessel boasts a large 40-gallon capacity
Outdoor reset
Disconnect circuit breakers for each heating element
Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
Compact, can easily fit through service doors
No minimum return water temperature required
5-year vessel warranty
0-10VDC terminal enabling control of boiler via building automation system, etc.
Software and interface cable for setup, monitoring, and troubleshooting
Standard Equipment
Circuit breakers, each stage
Manual reset hi-limit - 220° F
Auto reset limit control - 210° F
Low water cut-off with manual reset
ASME pressure relief valve, 30 psi
Pressure/temperature gauge
Drain pipe
3” NPT inlet and outlet, with inspection opening
Incoloy sheathed heating elements
Built-in load management controls, vessel top screw-in