Search in Category
Filter Your Search
![Show Attribute](/images/misc/expanded.gif)
![Show Attribute](/images/misc/expanded.gif)
![Show Attribute](/images/misc/expanded.gif)
![Show Attribute](/images/misc/expanded.gif)
![Show Attribute](/images/misc/expanded.gif)
![Show Attribute](/images/misc/expanded.gif)
Browse Categories
Electric Boilers
Boiler Commercial 27 KW 92000 BTU 240/3
Supplier #: EB-NB-144-480
TS Series Boiler (EB-CX-**)
Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.
Other Benefits
- Larger physical size than our standard TS series boiler
- ASME and CSA/UL listed
- Wall-mounted
- Vessel boasts a large 13-gallon capacity
- Outside temperature sensing
- TS series style cabinet
- Disconnect circuit breaker included
Boiler Indstrl 240 KW 819120 BTU 600/3
Supplier #: EB-NB-150-240
Electro-Boiler Industrial Series
Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.
Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.
Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.
Features & Benefits
- ASME and CSA/UL listed
- Vessel boasts a large 40-gallon capacity
- Outdoor reset
- Disconnect circuit breakers for each heating element
- Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
- Compact, can easily fit through service doors
- No minimum return water temperature required
- 5-year vessel warranty
- 0-10VDC terminal enabling control of boiler via building automation system, etc.
- Software and interface cable for setup, monitoring, and troubleshooting
Standard Equipment
- Circuit breakers, each stage
- Manual reset hi-limit - 220° F
- Auto reset limit control - 210° F
- Low water cut-off with manual reset
- ASME pressure relief valve, 30 psi
- Pressure/temperature gauge
- Drain pipe
- 3” NPT inlet and outlet, with inspection opening
- Incoloy sheathed heating elements
- Built-in load management controls, vessel top screw-in
- Staging indicator lights, at contactor
- Main supply circuit lugs
- Safety door interlock and lockable door latch
Control Box includes:
- Contains all boiler controls and adjustments
- Bender fault monitor (optional)
- Manual reset low water cut-off
- Hi-limit reset button
- Temp Sensing & Alarm board
- T775R controller (optional)
- Alarm and alarm LED’s
- Sequencer up to 15 stages
- Progressive staging delay time
Boiler Comme 40 KW 138000 BTU 240/3
Supplier #: EB-NB-160-480
TS Series Boiler (EB-CX-**)
Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.
Other Benefits
- Larger physical size than our standard TS series boiler
- ASME and CSA/UL listed
- Wall-mounted
- Vessel boasts a large 13-gallon capacity
- Outside temperature sensing
- TS series style cabinet
- Disconnect circuit breaker included
Boiler Comme 45 KW 153000 BTU 600/3
Supplier #: EB-NB-160-600
TS Series Boiler (EB-CX-**)
Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.
Other Benefits
- Larger physical size than our standard TS series boiler
- ASME and CSA/UL listed
- Wall-mounted
- Vessel boasts a large 13-gallon capacity
- Outside temperature sensing
- TS series style cabinet
- Disconnect circuit breaker included
Boiler Indstrl 120 KW 409560 BTU 600/3
Supplier #: EB-NB-180-208
Electro-Boiler Industrial Series
Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.
Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.
Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.
Features & Benefits
- ASME and CSA/UL listed
- Vessel boasts a large 40-gallon capacity
- Outdoor reset
- Disconnect circuit breakers for each heating element
- Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
- Compact, can easily fit through service doors
- No minimum return water temperature required
- 5-year vessel warranty
- 0-10VDC terminal enabling control of boiler via building automation system, etc.
- Software and interface cable for setup, monitoring, and troubleshooting
Standard Equipment
- Circuit breakers, each stage
- Manual reset hi-limit - 220° F
- Auto reset limit control - 210° F
- Low water cut-off with manual reset
- ASME pressure relief valve, 30 psi
- Pressure/temperature gauge
- Drain pipe
- 3” NPT inlet and outlet, with inspection opening
- Incoloy sheathed heating elements
- Built-in load management controls, vessel top screw-in
- Staging indicator lights, at contactor
- Main supply circuit lugs
- Safety door interlock and lockable door latch
Control Box includes:
- Contains all boiler controls and adjustments
- Bender fault monitor (optional)
- Manual reset low water cut-off
- Hi-limit reset button
- Temp Sensing & Alarm board
- T775R controller (optional)
- Alarm and alarm LED’s
- Sequencer up to 15 stages
- Progressive staging delay time
Boiler Indstrl 300 KW 1023900 BTU 600/3
Supplier #: EB-NB-180-240
Electro-Boiler Industrial Series
Electro Industries’ Industrial boilers are a very compact and an effective solution to retrofitting old, inefficient fossil fuel boilers, or for use in new installations.
Safety is one major benefit of these boilers. Several state electrical jurisdictions are requiring the Bender Insulation Monitor device (ground fault) for increased operating safety, personal protection and reliability of the boiler. Secondly, there are individual circuit breakers for each heating element, further increasing the safety and reliability of our boilers.
Each boiler also includes built-in digital supply, return, and outdoor temperature sensors, enabling you to internally set and maintain the correct system design temperature, simplifying the installation process.
Features & Benefits
- ASME and CSA/UL listed
- Vessel boasts a large 40-gallon capacity
- Outdoor reset
- Disconnect circuit breakers for each heating element
- Pressure vessel built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code
- Compact, can easily fit through service doors
- No minimum return water temperature required
- 5-year vessel warranty
- 0-10VDC terminal enabling control of boiler via building automation system, etc.
- Software and interface cable for setup, monitoring, and troubleshooting
Standard Equipment
- Circuit breakers, each stage
- Manual reset hi-limit - 220° F
- Auto reset limit control - 210° F
- Low water cut-off with manual reset
- ASME pressure relief valve, 30 psi
- Pressure/temperature gauge
- Drain pipe
- 3” NPT inlet and outlet, with inspection opening
- Incoloy sheathed heating elements
- Built-in load management controls, vessel top screw-in
- Staging indicator lights, at contactor
- Main supply circuit lugs
- Safety door interlock and lockable door latch
Control Box includes:
- Contains all boiler controls and adjustments
- Bender fault monitor (optional)
- Manual reset low water cut-off
- Hi-limit reset button
- Temp Sensing & Alarm board
- T775R controller (optional)
- Alarm and alarm LED’s
- Sequencer up to 15 stages
- Progressive staging delay time
Boiler Comme 54 KW 184000 BTU 600/3
Supplier #: EB-NB-200-600
TS Series Boiler (EB-CX-**)
Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.
Other Benefits
- Larger physical size than our standard TS series boiler
- ASME and CSA/UL listed
- Wall-mounted
- Vessel boasts a large 13-gallon capacity
- Outside temperature sensing
- TS series style cabinet
- Disconnect circuit breaker included
Boiler Commercial 18 KW 61500 BTU 480/3
Supplier #: EB-NB-240-600
TS Series Boiler (EB-CX-**)
Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.
Other Benefits
- Larger physical size than our standard TS series boiler
- ASME and CSA/UL listed
- Wall-mounted
- Vessel boasts a large 13-gallon capacity
- Outside temperature sensing
- TS series style cabinet
- Disconnect circuit breaker included
Boiler Comme 40 KW 136000 BTU 240/1
Supplier #: EB-NB-300-480
TS Series Boiler (EB-CX-**)
Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.
Other Benefits
- Larger physical size than our standard TS series boiler
- ASME and CSA/UL listed
- Wall-mounted
- Vessel boasts a large 13-gallon capacity
- Outside temperature sensing
- TS series style cabinet
- Disconnect circuit breaker included
Boiler Comme 36 KW 123000 BTU 480/3
Supplier #: EB-NB-300-600
TS Series Boiler (EB-CX-**)
Designed for larger hydronic heating applications, our "CX" series boilers offer many new features. Available in many voltages and capacities, our temperature sensing, relay staging and vessel configuration offer quiet operation, minimal relay cycling, consistent temperature output and most of all product reliability.
Other Benefits
- Larger physical size than our standard TS series boiler
- ASME and CSA/UL listed
- Wall-mounted
- Vessel boasts a large 13-gallon capacity
- Outside temperature sensing
- TS series style cabinet
- Disconnect circuit breaker included
![Question Mark Box](/images/Misc/question_mark_box.gif)