GLAF076, AF076 Sway Brace Swivel Attachment

DESCRIPTION

Size Range: Brace Pipe: 1" through 2" Sch. 40; Anchor Size: 1/2"

Material: Ductile Iron Jaw with Carbon Steel Baseplate and Hardware

Finish: Plain or Electro-Galvanized per ASTM B633

Service: A seismic swivel attachment designed to connect brace pipe to the building structure or to a seismic structural attachment. The Sway Brace Swivel Attachment rigidly braces piping systems subjected to lateral seismic loads.

Approvals: cULus Listed (UL 203a) and FM Approved (FM 1950-10 & FM 1950-13). Complies with the hanging and bracing requirements listed in NFPA 13.

Features:

• One universal jaw allows for attachment to multiple brace pipe sizes.
• Field adjustable design requires no threading of the brace pipe.
• Shear off set screw provides a visual indication that the desired torque value has been achieved.

Installation Instructions:

• Insert anchor through the mounting hole and into the structure or seismic structural attachment.
• For connection to Fig. AF085, AF086, AF087, and AF779 seismic structural attachments, the bolt and nuts shall be installed wrench tight (typically finger tight plus 1/4 to 1/2 turns).
• For connection to concrete, wood, timber, steel, and other structures, install fasteners per the fastener manufacturer’s installation instructions.
• Insert Sch. 40 brace pipe into the brace jaw until the brace pipe bottoms out.
• Torque shear off bolt until head shears off.
• Check the cross bolt and nut and ensure the nut is wrench tight.
• Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes.

Ordering: Specify figure number, finish and description.