Search Results

The Transformer Kit 009K is a 40 VA, 24 V (ac) transformer for use with products that require an external transformer. It includes an in-line fuse for circuit protection, and a 4” x 4” electrical J-Box for mounting.

For Further Information and up to date literature visit: Tekmar Documentation

The 24 V (ac) Transformer 013 has a 115 V (ac) primary and a 24 V (ac) secondary with a capacity of 96 VA. A resettable circuit breaker protects the transformer from overloading. A 4" x 4" electrical junction box is included for mounting.

For Further Information and up to date literature visit: Tekmar Documentation

The tekmarNet® 4 Timer 033 provides a programmable setback schedule for an entire tekmarNet® system. It maintains time and communicates up to 4 schedules on the network that up to 96 tekmarNet® thermostats can follow. This product can also be used in stand alone applications.

For Further Information and up to date literature visit: Tekmar Documentation

The Slab Sensor 072 is designed to measure temperature in outside snow melting slabs. It has a high density polyethylene (HDPE) sleeve which is designed for use in conduits, soils, or concrete, as it is suitable for direct burial. This product is supplied with 20 ft (6 m) of 2 conductor cable.

For Further Information and up to date literature visit: Tekmar Documentation

The Slab Sensor 073 is designed to measure temperature in outside snow melting slabs. It has a high density polyethylene (HDPE) sleeve which is designed for use in conduits, soils, or concrete, as it is suitable for direct burial. This product is supplied with 40 ft (12 m) of 2-conductor cable.

For Further Information and up to date literature visit: Tekmar Documentation

The Indoor Sensor 077 is designed to act as a remote indoor temperature sensor. It can be used in a number of applications for indoor temperature sensing, and is sized for attachment to a 2” x 4” electrical box. This is a 10K thermistor designed to be installed with a compatible tekmar thermostat or control.

For Further Information and up to date literature visit: Tekmar Documentation

The Slab Sensor 079 is commonly used for floor temperature sensing in floor heating applications. The thin casing allows for retrofit installation between tile spaces if necessary. This sensor is designed to provide a thermostat with the ability to maintain a minimum slab temperature, or help to limit the maximum slab temperature.

For Further Information and up to date literature visit: Tekmar Documentation

The Universal Sensor Enclosure 080 is designed for mounting a universal sensor either into a standard 3/8” I.D. well, or strapped onto the surface of a 1” to 4” diameter pipe. The end of the enclosure has a knock out to connect 1/2” conduit.

For Further Information and up to date literature visit: Tekmar Documentation

The Three Outdoor Sensor Module 081 includes three 10 k? thermistors which provides an accurate measurement of the outdoor temperature. Each sensor has two separate terminals for wiring. The 081 is designed to be installed in a tekmar Outdoor Sensor 070 enclosure. This allows for four separate sensors to be combined into a single enclosure that is mounted on the exterior of the building.

For Further Information and up to date literature visit: Tekmar Documentation

The Duct Sensor 083 is a 10 k? temperature sensor designed to measure the average temperature of the air stream in a heating, cooling, or ventilation duct. It has a 6” (150 mm) long probe connected to a 2” x 4” electrical box for easy wiring.

For Further Information and up to date literature visit: Tekmar Documentation